i just started using creation master to edit players faces and when i tried playing a match, the game crashed "fifa10.exe has stopped working"

Anyone have any ideas how to fix this problem?

ps. i have already cleaned FAT but it still comes up with the same error.

Hello everyone,

I installed Fifamania Superpatch 10 and after that I can't edit things in CM 10 (transfers, player numbers, placement of numbers on shorts, etc.).

Can somebody help me?

If permanently edited a squad..... by that meaning putting all the classic XI players in other squad. and editing some players!

that's y my fifa keeps crashing!
how can i fix this! i deleted all the files for CM10, and ea sport from system![everything].

And i even download fifa10 again, and my team is still edited after all the **** i did! :swear2:grrrrr.............

Appreciate your help! :tongue:

I can tell you that the site sometimes doesen't work.
Thx to Andreasmax for helping me!

Hey i have this error when i try to open songs in Sounds Master

http://j.imagehost.org/0907/SM.jpg (http://j.imagehost.org/view/0907/SM)

I am thinking about finding as many national teams as I can and creating a tournament using CM10. I understand there is a 64 team limit per group. I have a few questions regarding possible ways of doing this.

1 - Is there a team limit to the amount of "international" teams. I know there is a 52 team limit to assign national teams in pro mode. I am not planning on doing pro mode. Is it possible to add as many teams as I can to the "international" league but remove them from the country section, therefore limiting the tournament_ids table to 52 records but still have as many international teams as I want?

2 - Is there a limit to the amount of groups I can have based on the 64 team limit? Let;s say I have 128 teams total to pick from, can I create a tournament with a group setup as follows:

division a (16 groups with 4 teams in each group)

division b (16 groups with 4 teams in each group)

have all the teams in division a play 2 games with each other team in their group only

have all the teams in division b play 2 games with each other team in their group only

have the top 2 teams in each group in both divisions advance to a new qualifying stage. I am now left with 64 teams total

create a new group stage with either 16 groups and 4 teams per group or 8 groups with 8 teams per group. Again each team will play each other team within their group twice.

If I decide to go the 16 group way the top 2 teams advance to the world cup and I can set up the finals tournament based on real world setups

If I decide to go the 8 group way the top 4 teams advance to the world cup and I can set up the finals tournament based on real world setups

Rinaldo, an error develops everytime I try to import a patch, even if this is CMS compliant, like the ones on the FifaMaster site.

I tried to import the CMS_ItalianSerieA_10_V2.cmp. But when I press "Load" the following appears:

http://img163.imageshack.us/img163/7524/cmspatchloaderror.jpg

And the "Details" are:


************** Exception Text **************
System.ArgumentException: 1 is not a supported code page.
Parameter name: codepage
at System.Text.Encoding.GetEncoding(Int32 codepage)
at ICSharpCode.SharpZipLib.Zip.ZipFile.ReadEntries()
at ICSharpCode.SharpZipLib.Zip.ZipFile..ctor(String name)
at CreationMaster.PatchLoaderForm.buttonLoad_Click(Ob ject sender, EventArgs e)
at System.Windows.Forms.ToolStripItem.RaiseEvent(Obje ct key, EventArgs e)
at System.Windows.Forms.ToolStripButton.OnClick(Event Args e)
at System.Windows.Forms.ToolStripItem.HandleClick(Eve ntArgs e)
at System.Windows.Forms.ToolStripItem.HandleMouseUp(M ouseEventArgs e)
at System.Windows.Forms.ToolStripItem.FireEventIntera ctive(EventArgs e, ToolStripItemEventType met)
at System.Windows.Forms.ToolStripItem.FireEvent(Event Args e, ToolStripItemEventType met)
at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEven tArgs mea)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Mes sage& m)
at System.Windows.Forms.ToolStrip.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.O nMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3603 (GDR.050727-3600)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
CreationMaster10
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files/Fifa%20Master/Creation%20Master%2010/CreationMaster10.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
FifaControls
Assembly Version: 0.0.0.0
Win32 Version: 0.0.0.0
CodeBase: file:///C:/Program%20Files/Fifa%20Master/Creation%20Master%2010/FifaControls.DLL
----------------------------------------
FifaLibrary10
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files/Fifa%20Master/Creation%20Master%2010/FifaLibrary10.DLL
----------------------------------------
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/Windows/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3074 (QFE.050727-3000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.DirectX.Direct3D
Assembly Version: 1.0.2902.0
Win32 Version: 9.05.132.0000
CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.DirectX.Direct3D/1.0.2902.0__31bf3856ad364e35/Microsoft.DirectX.Direct3D.dll
----------------------------------------
Microsoft.DirectX
Assembly Version: 1.0.2902.0
Win32 Version: 5.04.00.2904
CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.DirectX/1.0.2902.0__31bf3856ad364e35/Microsoft.DirectX.dll
----------------------------------------
ICSharpCode.SharpZipLib
Assembly Version: 0.85.4.369
Win32 Version: 0.85.4.369
CodeBase: file:///C:/Program%20Files/Fifa%20Master/Creation%20Master%2010/ICSharpCode.SharpZipLib.DLL
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.




Could you kindly give solutions to my problem?

Hey i have this error when i try to open songs in Sounds Master

http://j.imagehost.org/0907/SM.jpg (http://j.imagehost.org/view/0907/SM)

This hapenned after i installed the revolutionary menu patch, saying that though i never tried to open the songs before.

I don't suppose this error is anything to do with fonts is it?

anyone?

Could someone re-upload KDM 10, a version that works with Windows 7?

Thanks!

i have installed a world cup patch and the teams that are in world cup. i have also added the teams that had to be created into the international league. now everytime i try to start the tournament the game crashes and it also crashes when i try to play any international match. could someone please help.

thank you

i have installed a world cup patch and the teams that are in world cup. i have also added the teams that had to be created into the international league. now everytime i try to start the tournament the game crashes and it also crashes when i try to play any international match. could someone please help.

thank you

From what I was able to figure out the tournament that comes with the world cup patch has more than 156 teams. From what I understand the game can only support 156 teams. When you go into "New Tournament" the game will crash before you actually get to pick a tournament b/c the world cup patch tournament is too complex for the game to handle.

The international match crashed also due to some of the teams. I had an issue with Wales. I was able to load "Kick Off" and select teams but whenever I got to Wales and a few others the game crashed. I was not able to figure it out.

I am trying to use FifaKorea's World Cup Patch and create the world cup qualifications from scratch. I can get the tournament loaded and create a new one but every time I finish the first game and the results are saved the game crashes.

This is a little help for people who got team name not found (sample $3023312 not found) when you use creation master to load a team patch..I had this problem when I loaded a team patch for FIFA 2010..I spend some days looking for answer here in over internet too.
I found soulution for my case, and is easy, maybe this can help to some other people whit the same problem...
My mistake: load the patch with CM10 to the general database. And the problem is I use spanish (mex) database to play, so the fix for me, is when open Creation Master 10 to use mods, patch, or custom teams, OPEN the right data base for the language you use, this will make you open the right data for change.
Maybe this can help some one here or to Rinaldo too.
Thanks.

(Y)

"CreationMaster10 has encountered a problem and needs to close. We are sorry for the inconvenience."

What's the problem???I have .NET framework installed.

:mad::mad::swear2::swear2:I will go to crzay
After Doing Alot of Works on FIFA 10 Version using CM 10
When I was Saving Yesterday Changes My PC make Restart Suddenly when I Open It Again AND Open CM 10 an Error Appear

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.IndexOutOfRangeException: Index was outside the bounds of the array.
at FifaLibrary10.DbFile.Load(String fileName)
at FifaLibrary10.DbFile..ctor(String fileName)
at FifaLibrary10.FifaEnvironment.OpenLangDb()
at CreationMaster.MainForm.Open()
at CreationMaster.MainForm.menuOpenFifa_Click(Object sender, EventArgs e)
at System.Windows.Forms.ToolStripItem.RaiseEvent(Obje ct key, EventArgs e)
at System.Windows.Forms.ToolStripMenuItem.OnClick(Eve ntArgs e)
at System.Windows.Forms.ToolStripItem.HandleClick(Eve ntArgs e)
at System.Windows.Forms.ToolStripItem.HandleMouseUp(M ouseEventArgs e)
at System.Windows.Forms.ToolStripItem.FireEventIntera ctive(EventArgs e, ToolStripItemEventType met)
at System.Windows.Forms.ToolStripItem.FireEvent(Event Args e, ToolStripItemEventType met)
at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEven tArgs mea)
at System.Windows.Forms.ToolStripDropDown.OnMouseUp(M ouseEventArgs mea)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Mes sage& m)
at System.Windows.Forms.ToolStrip.WndProc(Message& m)
at System.Windows.Forms.ToolStripDropDown.WndProc(Mes sage& m)
at System.Windows.Forms.Control.ControlNativeWindow.O nMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3603 (GDR.050727-3600)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
CreationMaster10
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files/Fifa%20Master/Creation%20Master%2010/CreationMaster10.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3614 (GDR.050727-3600)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
FifaControls
Assembly Version: 0.0.0.0
Win32 Version: 0.0.0.0
CodeBase: file:///C:/Program%20Files/Fifa%20Master/Creation%20Master%2010/FifaControls.DLL
----------------------------------------
FifaLibrary10
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files/Fifa%20Master/Creation%20Master%2010/FifaLibrary10.DLL
----------------------------------------
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/Windows/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3074 (QFE.050727-3000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.DirectX.Direct3D
Assembly Version: 1.0.2902.0
Win32 Version: 9.05.132.0000
CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.DirectX.Direct3D/1.0.2902.0__31bf3856ad364e35/Microsoft.DirectX.Direct3D.dll
----------------------------------------
Microsoft.DirectX
Assembly Version: 1.0.2902.0
Win32 Version: 5.04.00.2904
CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.DirectX/1.0.2902.0__31bf3856ad364e35/Microsoft.DirectX.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Note I don't want To Lose My Changes And Patches

And I want An Answer for That Question : Where CM 10 Save Its Changes and Data

Please Rindalo Help me as fast as possible

When I have edited national team logos for example I have replaced Hungary flag with Hungary national team logo in CM10, I cant see the logo changed in my game. What do I need to do?

When I have edited national team logos for example I have replaced Hungary flag with Hungary national team logo in CM10, I cant see the logo changed in my game. What do I need to do?

there are 2 logos man, general tab logo & gui tab logo.

gui is the in game logo, which you obviously didnt change.

there are 2 logos man, general tab logo & gui tab logo.

gui is the in game logo, which you obviously didnt change.

Yeah, I found that out by myself earlier. But thnx still for the answer!:)

How about those white areas around the logos? Can I get them somehow disappear?

Yeah, I found that out by myself earlier. But thnx still for the answer!:)

How about those white areas around the logos? Can I get them somehow disappear?

what white areas ?

what white areas ?

Nevermind.

I have strange problem when I try to download Rinaldos CMS League patches (for example Ukraine) it imports only about a half of the league and then the game doesnt work (even though I make a fresh installation). But when i have loaded this http://www.soccergaming.com/forums/showthread.php?t=161774 it works just fine.

Edit. I get also some error message which says I cant continue importing the patch.

Edit.2 Problem solved. No need to answer.

Rinaldo

I posted this already in the support side. So when I have imported the CMS World Cup patch, it seems to work fine (all teams etc.) but when I go to the Tournament>New Tournament game freezes. I have removed long team names but still It doesnt work.

Hi ! :)

I updated a team in CM10 (summer transfers) but the updated team appears in the game without the changes I made... :(

I've done this before with other teams and everything worked without any problems!

If anyone has the solution I'd appreciate! http://www.pcdiga.net/images/smilies/bowdown.gif

TY
;)

hi...rinaldo

i have a problem here...
i fifa korea patch and everything was working fine...yesterday i just installed a new national flags patch by damien and now i have this problem where the jersey number on the front of any team is cut...for instance in the england team..

rooney wears no.10.....in my game the number on the front of the shirt appears like 1( ....with half of the 0(zero) not there...can u help me fix this bug...i have tried by reinstalling fifa and reinstalling cm10...but it still persists...

I'm having some trouble with patching (I've read the faq's and info on fifa master website) fifa 10. Isthere a particular order I should do things in? The end result is that if (in manager mode) I play a pre season match with any of the teams I've added in, the game crashes during loading, sometimes it crashes after if I quick sim the game. Here is what I've tried to install:

First thig I did was to click on automatic zdata option and expand database.

then I added in all of the cms that come wih cm10 (boots, jersey fonts, etc... although I only did one "country" one, "country full" rather than "PRO compatible" - I don't know why, just chose that one)

then winter roster update

then a few leagues: Croatia, Hungary, Argentina

sometimes I also add in his WC2010 SA patch and the stadium one as well, but included or not, the game doesn't work.

Then I clean the fat, save, exit and try to play...

I can't figure out what I've done wrong. I've done all the obvious things like delete fifa10 folder, etc, but there must be something I'm doing wrong. Thanks for any help in advance and compliments to Rinaldo, it's great stuff, even if I can't quite figure out how to make it work.

UPDATE:

Okay, whole new install, cause at last try, the error message you get when a program crashes (send error report...) comes up as soon as I start the game, no loading even. So, new install:

changed a few songs on sm10

I want to install just the transfer update and make some manual changes (much as I'd like wc2010 and some extra leagues - especially the greek league with revamped champions league - i can't seem to get it to work). In order to install transfer update, I have to install the other pre patches (boots, uniforms, countries...), right? Should I install all of them, some of them? Particular order? I've been trying to find a more complete faq that might have answers but have so far been unsuccessful.

Hi ! :)

I updated a team in CM10 (summer transfers) but the updated team appears in the game without the changes I made... :(

I've done this before with other teams and everything worked without any problems!

If anyone has the solution I'd appreciate! http://www.pcdiga.net/images/smilies/bowdown.gif

TY
;)

Nobody ? :(

It can happen if u manually have edited the team in the Team Management option WITHIN THE GAME. Changing team composition within the game does not affect fifa.db at all. It is stored in My Documents/Fifa 10 folder.

I have solved the problem!

I updated other team and that team that did not appear update now appears. :)

Maybe it had not reloading the files correctly ...

But thanks for the help arkapd! ;)

Best Regards !

It can happen if u manually have edited the team in the Team Management option WITHIN THE GAME. Changing team composition within the game does not affect fifa.db at all. It is stored in My Documents/Fifa 10 folder.
Got the same problem. Just added a new team in the International League. Then I deleted the My Documents->FIFA 10 folder, but my game still crashes when choosing that team in Kick-Off. If I remember correctly, my Specific ZDATA was 51, and when I added that cmp (cristiankhalo's AFC patch), I did not choose any option from Patch->Load->Replace Selection.

Would that affect why I can't load that team?

It can happen if u manually have edited the team in the Team Management option WITHIN THE GAME. Changing team composition within the game does not affect fifa.db at all. It is stored in My Documents/Fifa 10 folder.
Got the same problem. Just added a new team in the International League. Then I deleted the My Documents->FIFA 10 folder, but my game still crashes when choosing that team in Kick-Off. If I remember correctly, my Specific ZDATA was 51, and when I added that cmp (cristiankhalo's AFC patch), I did not choose any option from Patch->Load->Replace Selection.

Would that affect why I can't load that team?

SAME **** i did.....now my fifa10 is ****ed up! :(
i deleted everything and install it again.....Nothing------ STILL CRASHES------ :( :|

I have a problem ,

I have Fifamania Superpatch 10 , but i can create new team my fifa , but my fifa crashed after created ! Pls help me :D

Got the same problem. Just added a new team in the International League. Then I deleted the My Documents->FIFA 10 folder, but my game still crashes when choosing that team in Kick-Off. If I remember correctly, my Specific ZDATA was 51, and when I added that cmp (cristiankhalo's AFC patch), I did not choose any option from Patch->Load->Replace Selection.

Would that affect why I can't load that team?
I resolved this, only after deleting that team and transferring its players to another. Not all of the teams I downloaded suffered this (just added Bahrain and worked perfectly), but is there a solution that would make it crash-proof for ALL teams?

SAME **** i did.....now my fifa10 is ****ed up! :(
i deleted everything and install it again.....Nothing------ STILL CRASHES------ :( :|

search appdata>local>VirtualStore>ProgramFiles>EASPorts and then delete FIFA 10 Folder there and reinstall your FIFA,normally it should work

I have a problem ,

I have Fifamania Superpatch 10 , but i can create new team my fifa , but my fifa crashed after created ! Pls help me :D

I don't know but maybe the patch doesn't allow any new changes?:icon_spin:
Ask the creators of the patch they should give you a clearer answer :)

Nvm... i fixed my fifa!
:D finally!!!

I don't know but maybe the patch doesn't allow any new changes?:icon_spin:
Ask the creators of the patch they should give you a clearer answer :)

Okay, thanks :)

Rinaldo is being about download the Chilean league of the web site but he gives me an error. Is there some other place to download it?

Filefront is not working at the moment because they make some changes wait a few hours/days and you can download the Chilean league as usual

Hello,
I have add some teams and third kits for this teams.
And I have a trouble. In the 'fan shop', I can find 8 third kits who are in the game (before my change). This 8 third kit are in the CM10.
I have add them with DBM10 in the table "reward":
http://img44.imageshack.us/img44/64/dbm3rdkit1.th.jpg (http://img44.imageshack.us/i/dbm3rdkit1.jpg/)
When I go in the fan shop in game, this 8 third kit are here but locked.
If I want to buy them (0 point) the game crash.
Someone can help me, please?

Filefront is not working at the moment because they make some changes wait a few hours/days and you can download the Chilean league as usual

oh i c.......
thanks for heads up! :D

Hello,
I have add some teams and third kits for this teams.
And I have a trouble. In the 'fan shop', I can find 8 third kits who are in the game (before my change). This 8 third kit are in the CM10.
I have add them with DBM10 in the table "reward":
http://img44.imageshack.us/img44/64/dbm3rdkit1.th.jpg (http://img44.imageshack.us/i/dbm3rdkit1.jpg/)
When I go in the fan shop in game, this 8 third kit are here but locked.
If I want to buy them (0 point) the game crash.
Someone can help me, please?
Here is my data base: http://www.filefront.com/17144203/bdd-30--v1.rar/
I hope someone can found the error. Thanks in advance. ;)

How it is possible to make a stadium for training and to assign it for a team?
I tried to change the stadium type, but I cant make it training stadium for a team...

Hi Rinaldo! Sorry, but I need your help.

I'm trying to use the fdm10, but when I load the fifa.db the "famous problem" appear...now: when I load it through the CM10 there is no problem (but of course i cannot create new faces) and I have al the net framework version installed (from 2.0 to 4 beta).
So: what might be the error? Can you help me?
Thanks for everything you bring to us!

Hi.. I need help with SM 10.. I replace two songs.. put file and save...

I enter the game and hear the songs.. but when I play a match, the game closed.. and appear the fifa10.exe error.. (clasic window: report bug(informe de errores))

sorry for my english.. I wait for a solution or answer..

greetings

Hi,

First of all, let me say you Rinaldo, Outsider & Regularcat are awesome.

And i have a question.
Which is the Zdata Save Selection?
Auto or Specific or in Root Folder?

All the way, i was saving in Specific as it is default.
But I've received "System out of Memory Exception" error 2times in 4Days.
And all my works are gone :facepalm::$

So pls tell me which is the best way to save Zdata so that i can avoid that "System out of Memory Exception" thingy.

Thanks In Advance.
Code

how to fix formation tab?????
pls tell me...

http://img190.imageshack.us/img190/4663/newpicture004n.jpg (http://img190.imageshack.us/i/newpicture004n.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

Hello there!I'm having a problem:i started a career in MM and after i finished the first season when i am at player's renewal contract my fifa crashes.Can tell somebody why and if there is an solution for that?I have 7 cmp leagues added plus 1 in exe format.Thank u very much!

hi!

now the game works.. i can play a match.. I hear the comentaries and music but when I hear the music imported for me (linkin park), I can hear this but after when I play a match and end the match in menu the music no works.. I can not hear all songs :( :/

help please.

maybe this is the problem?? :
http://img695.imageshack.us/img695/7774/errorsm.th.png (http://img695.imageshack.us/i/errorsm.png/)

Uploaded with ImageShack.us (http://imageshack.us)


when I import a song with SM appear in my fifa this new column with nothing..

hello.

i have a big problem.

i import the leagues, cyprus, greece, romania and ukraine(cmp) and i have two problems. (german version of fifa 10)

at first , when i start the game , the countrys and the teams have the false name (team 123 123123?? ) and when i begin a new season , the start the load after the game to 79% and the game shut down=)

please help me

Hi all ! Rinaldo , i have a big problem .. First of all , i created a romanian league with 2 division .. All works very good , no crash , i can play season two , season three , but for example teams (in my romanian league) doesn`t qualify in european cups .. (and in creation master is set first team and second team from league to qualify in champions league and 3rd , 4th , 5th teams to qualify in europa league) , i know how to edit in creation master , but this problem i don`t know how to resolve .
I`ve simulated a season with another team from another country (arsenal) and i`ve finished into a europa league position and i`ve qualify in it . But it`s a total disastre . For example , Aalborg is 4 Aalborg etc. The problem is why my teams doesn`t qualify in european cups (i`ve set in creation master to qualify) ?

p.s i have the default cups (efa cup and ecc cup) , not patched .

Good day! I have not a big, but a problem with creating new players using CM10. I use the fifamania superpatch, and i want to add new players. I create one and transfer him to Liverpool, than i check squads in the game, and created player where on his place. After that i create two players and transfer them to Wisla Krakow, but they dont appear in the game. Any solution for this problem? I guess it happens because i use Superpatch... And sorry for my english.

Good day! I have not a big, but a problem with creating new players using CM10. I use the fifamania superpatch, and i want to add new players. I create one and transfer him to Liverpool, than i check squads in the game, and created player where on his place. After that i create two players and transfer them to Wisla Krakow, but they dont appear in the game. Any solution for this problem? I guess it happens because i use Superpatch... And sorry for my english.

I think you need to expand the database , the problem is that you reached the limit of FIFA players . Try to expand the database and try again .

I think you need to expand the database , the problem is that you reached the limit of FIFA players . Try to expand the database and try again .
i got this for using expanded database and right after i save i get this!???

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.IO.IOException: The process cannot access the file 'C:\Program Files (x86)\EA Sports\FIFA 10\NEW\data\cmn\fifa.db' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access)
at FifaLibrary10.DbFile.Save(String fileName)
at FifaLibrary10.FifaEnvironment.SaveFifaDb()
at CreationMaster.MainForm.SaveFiles()
at CreationMaster.MainForm.menuSave_Click(Object sender, EventArgs e)
at System.Windows.Forms.ToolStripItem.RaiseEvent(Obje ct key, EventArgs e)
at System.Windows.Forms.ToolStripMenuItem.OnClick(Eve ntArgs e)
at System.Windows.Forms.ToolStripItem.HandleClick(Eve ntArgs e)
at System.Windows.Forms.ToolStripItem.HandleMouseUp(M ouseEventArgs e)
at System.Windows.Forms.ToolStripItem.FireEventIntera ctive(EventArgs e, ToolStripItemEventType met)
at System.Windows.Forms.ToolStripItem.FireEvent(Event Args e, ToolStripItemEventType met)
at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEven tArgs mea)
at System.Windows.Forms.ToolStripDropDown.OnMouseUp(M ouseEventArgs mea)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Mes sage& m)
at System.Windows.Forms.ToolStrip.WndProc(Message& m)
at System.Windows.Forms.ToolStripDropDown.WndProc(Mes sage& m)
at System.Windows.Forms.Control.ControlNativeWindow.O nMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4200 (NetFxQFE.050727-4200)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
CreationMaster10
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files%20(x86)/Fifa%20Master/Creation%20Master%2010/CreationMaster10.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4205 (VistaSP2GDR.050727-4200)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
FifaControls
Assembly Version: 0.0.0.0
Win32 Version: 0.0.0.0
CodeBase: file:///C:/Program%20Files%20(x86)/Fifa%20Master/Creation%20Master%2010/FifaControls.DLL
----------------------------------------
FifaLibrary10
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files%20(x86)/Fifa%20Master/Creation%20Master%2010/FifaLibrary10.DLL
----------------------------------------
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.DirectX.Direct3D
Assembly Version: 1.0.2902.0
Win32 Version: 9.05.132.0000
CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.DirectX.Direct3D/1.0.2902.0__31bf3856ad364e35/Microsoft.DirectX.Direct3D.dll
----------------------------------------
Microsoft.DirectX
Assembly Version: 1.0.2902.0
Win32 Version: 5.04.00.2904
CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.DirectX/1.0.2902.0__31bf3856ad364e35/Microsoft.DirectX.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.




nvm i got fixed!:D

My FIFA won't start anymore, and I can't open it trough CM or MM either. This problem occurded after changing some player ratings trouhg MM, which I've done before, without any problem.

I've allready tried deleting the carreer and the last zdata I was working in, but that didn't help. Off course reinstalling is the easiest sollution, but then I'll lose hours of work on importing more then 200 faces and updating all transfers and rosters and such...

I hope somebody can help me? Thanks in advance...

Nevermind, Reg fixed it. Probably a bad save in MM, but the fifa.bak in the cmn folder still worked.
Thanks to Reg.

Hi everybody,

Appreciated our fifa tools and I would like to ask you 1 question about I can not access fifa-master.com website ? HTTP internal 500 error displayed .

I dont have the Manager Master for FF10 to edit the career saved file so that if you can, please share it back or upload to another host for me and I will thank so much for your help.

Really need that tool . :) :bob:

Have a nice day all.

Hi! I have a problem with CM10. I installed CM10, I installed NET Framework 3.5 but when I tried to open CM10, it shows me this error:

http://img10.myimg.de/untitledd8b0b.jpg

Download links doesnt work...someone can upload FDM(newst version)?

hey guys, I am going to be getting a new comp and I want to save all my changes on CM10. Is there a way to do this? What files do I need to save? Thanks

hey guys, I am going to be getting a new comp and I want to save all my changes on CM10. Is there a way to do this? What files do I need to save? Thanks

id help you but i hate eminems faggot ass, & apparantly your a fan of that fake ass white boy.

ps

8 mile is the very border of detroit, basically doesnt count.

i have some patched teams in fifa10.....
i used CM10 for it~
but now i want to play fifa online i can't cuz the game crashes!

i want to delete those patches but dunno how to???
appreciate the help guyz!!!

Hey Rinaldo!

I appreciate very much your work for FIFA Series. I would like if you could add for next CM TournamentWizard option to make WC with 24 teams like back in 94.

Thanks and all the best!

I tried to replace teams with CM 10..for example Newcastle Utd. from Coca Cola Championship with Portsmouth FC from Premier League..in CM 10 it shows that they are replaced..but when I enter Fifa 10..they are still not changed..can anyone tell me what I do wrong ?

You need to edit both league and tournament.

Hey guys if anyone would help me...

I've used CM10 and created a team of my own... i've not added any young players... everything looks amazing and it works fine in the tournment mode also... However, when i play in manager mode, my game freezes after the first game and before the start of the second game... It gets stuck after showing my expenses for that match and/or after any messages.

How do i solve this problem? I really like the new team but it's a pitty i can't play with it...

(P.S. - I haven't created any new tournment, just modified the league [EPL] in which i want my team to play by replacing an existant team with my new team)

Thanx!

u know alien boy ive got the same problem as u
i donknow how to fix either the thing what to do is....
dont do manager mode

What with Creation master for Fifa 11? Or something like Creation master Fifa 11?

From where can i download the monkeydragon 10 series for fifa 10

Hi.. I need help with SM 10.. I replace two songs.. put file and save...

I enter the game and hear the songs.. but when I play a match, the game closed.. and appear the fifa10.exe error.. (clasic window: report bug(informe de errores))

sorry for my english.. I wait for a solution or answer..

greetings

Do you still get this crash when you enter a match after using SM10 to edit? i was thinking of putting my own songs in fifa 10 but if i hear it crashes after you do it, then i won't. have any of you replaced commentary lines with SM10?

Does CM10 work for FIFA 09?

I am using CM 10 to edit faces....after i import and edit a texture of a player i cannot import it back to the CM10 because the import button is not active (it looks uncolored and does not respond to clicking)

some1 plz reply...made a lot of effort in editing texture (1st time) but cannot use it now :(

Hands off to you man........

rock on.......

Take a bo master.......

Does CM10 work for FIFA 09?

I suppose you should use CM09 for FIFA09.... :icon_spin:

Now that CM10 has been out for a while, is there a consensus on which is the best version of CM10? What bugs were fixed between versions v1.01 and v1.03? Which version of CM10 do you guys use?

is anyone working on squad updates for fifa 10 for the recent winter transfer window?

also, how do you transfer players to other teams in the DB Master? o.O

hi rinaldo, i hope you're still paying some attention to this thread or else I'm screwed.
i've worked with CM10 for a long time and everything went pretty much ok 'till a couple of weeks ago when i opened CM, load the game, when it did i went to insert a couple of new boots and the PC screen jumped to a blue BIOS screen (which i cannot figure out what it says, it passes really fast) and then reboot the PC. now this happens almost every time (and by almost i mean 80% of the time). it also happens with MM10 and CM09
please mate, can you tell me what's wrong and if i can fix it?

Why does CM10 keep on saving my imported cmp's to User/Local/VirtalStore/AppData/Program Files/FIFA10 folder even though I delete the folder and make CM10 to save the files to C/Program Files/EA Sports/FIFA10 folder?

Problem is only appearing on my laptop (Windows 7) and not on my desktop (Windows 7).

I have made some new popups for the Dutch Eredivisie (eredivisie live) based upon new season. Here are the .PNG-files I created for 'formations' and 'scoreline'

http://img853.imageshack.us/img853/2664/eredivisieformations.png (http://imageshack.us/photo/my-images/853/eredivisieformations.png/)

Uploaded with ImageShack.us (http://imageshack.us)

http://img694.imageshack.us/img694/4848/eredivisiescore.png (http://imageshack.us/photo/my-images/694/eredivisiescore.png/)

Uploaded with ImageShack.us (http://imageshack.us)

Unfortunately everytime I attempt to use my new popups FIFA crashes at the formation in the start of the match (and probably it will also crash when score popup appears).
Quite strange because I reworked the template from CJD Barca TV from the X Popups tool switcher. Same format, same size (PNG 1024x1024), but that not seems to be not the cause of the problem... When i export the original popup (.PNG as well as .fsh) and import it back into the game FIFA crashes either at the same point!
And when i switch back to other popups in the texturefolder everything runs properly.

I just can't understand why it is so difficult to import my own created popups, because I made some scoreboards as well but the didn't cause any problems...

I have tried all different CM10 options on my highest zdata (98), but none of them gave the satisfactory result.
I hope someone can help me with a solution or otherwise contribute or assist me a little bit in finishing full working Eredivisie popups season 11/12 for Fifa 2010....

Best regards ANDROUXA from AMSTERDAM, NL
PS: I have installed the cinematic patch, might that be a malefactor?