i have a Nvidia RIVA 128 graphics card. Is it possible for me to play Euro 2000 on a higher resolution? I know i could play Fifa 2000 at 800x600 smoothly, with Tal's Tweak fifa 2000. I would appreciate it if someone could tell me how to play at a higher resolution in Euro 2000.

This is the 3D setup ini file, you can check if your card is in there:

CARD_3Dfx Voodoo /M:voodoo /I
CARD_3Dfx Voodoo Rush /M:dx /I
CARD_3Dfx Banshee /R:640x480 /R:800x600 /M:dx /I
CARD_3Dfx Voodoo2 /R:640x480 /R:800x600 /I
CARD_3Dfx Voodoo3 /R:640x480 /R:800x600 /R:1024x768 /I
CARD_NVidia TNT /R:640x480 /R:800x600 /R:1024x768 /I
CARD_NVidia TNT2 /R:640x480 /R:800x600 /R:1024x768 /R:1280x1024 /R:1600x1200 /I
CARD_S3 Savage4 /R:640x480 /R:800x600 /R:1024x768 /R:1280x1024 /I
CARD_Matrox G400 /R:640x480 /R:800x600 /R:1024x768 /R:1280x1024 /I
CARD_Matrox G200 /R:640x480 /R:800x600 /R:1024x768 /R:1280x1024 /I
CARD_ATI Rage 128 /R:640x480 /R:800x600 /R:1024x768 /R:1280x1024 /I
CARD_NVidia NV10 /R:640x480 /R:800x600 /R:1024x768 /I
CARD_S3 Savage 3D /R:640x480 /R:800x600 /R:1024x768 /I
CARD_S3 Trio 3D /M:softdraw /I
CARD_Matrox Millenium
CARD_ATI Rage II
CARD_Chromatic Mpact 2
CARD_S3 Virge
CARD_S3 Virge VX
CARD_S3 Virge DX/GX
CARD_Intel i740

I am using the Asus TNT2 Ultra.
I set the game to 1600X1200 resolution.
Graphics are great. Very detail.
Much better than all soccer sims so far.
Only how I wish more teams in it.
Hope Fifa2001 will be much better.
Looking forward to it.
Okay now. I am going to play.....(ori.ver.)
Euro2000 now! Bye......

Okay, since you are an LFC supporter(support robbie fowler for euro2000 too) here's my thoughts: do this:

1) START-->RUN-->now write

regedit

2) the registery editor opens and you LOCAL_MACHINE-->SOFTWARE-->EA SPORTS-->EURO2000

3) now look on the properties on the right side. change the:

Thrash Resolution --> 1024x768 or 1280x1024 or 800x680

Thrash Driver --> dx


THAT'S MY THOUGHTS...

Tal

CARD_Matrox Graphics Millennium II PCI /R:640x480 /R:800x600 /R:1024x768 /R:1280x1024 /M:softdraw /I

I threw this in, set my card up in 3dsetvp. And it works as a 3dfx card. Works great.