Creation Master 07 Released

[ivanlusin]

Hi everyone!

Rinaldo i have a question. I have created a tourament in fifa and it works very very good. But i have a small problem. the tournament appeers in tourament and i career mode. in tourament mode works perfect i have a group stage and then the finals. In tournament mode i can watch the table at every point and i know on which place i am. The problem is the career mode in wich i can see only the next and previous matches but not the table.

But tournament like the UEFA or CL cup the tables appear normal(u can wath the table)

please help

 

[some guy]

I have downloaded a gameplay for fifa 07. They said to install manually with CM07. There are 4 .ini files and they are to be imported into config.dat and ini.big

I was wondering if anyone could explain for to do it with CM07. They say you can also use file master 07, but i have no clue how to use that, they just have weird hex editor and have no clue how to import.

 

[RobbieD_PL]

Are you sure it is a matter of CM 07 ? Which operations did you do to get this ?
Btw, use Dbmaster to remove the link between the team and the country in the international ids table.

I did it manually thru the mdb exported from UniDB, assigning the teams their international IDs in that table. Every other European team is fine, just these three as well as another team, Montenegro, whom I gave a manually created (ie thru the mdb) ID of 110083 and Nationality of 209 (as 110083 was close to Serbia's 110082 and 209 is the defunct Yugoslavia's nationality)

Umm I also kind of fixed this by giving the 4 teams new nationality IDs (226-229); everything is fine ingame and these teams have International Selections according to thier new id's, which i didnt have before; but I don't wanna save with CM now b/c they're still showing up as Australia in your program...

 

[$MZ77$]

I've downloaded a lot of new kits but I can't import them with CM07 Beta 2.08 cuz they have the wrong size but every kitmaker does them in this size.... What should I do???

THX

PLZ HELP ME

 

[Y0DaddyAlex]

CM07 crashes right when I load a referee kit using CEPv4. I hit "load" select the kit, and it crashes with an error message.... is there any way around this??
please help!

 

[gorrao]

CM 07 initializing problem

Hello Rinaldo.

help me out please.

I've been using CM 07 for quite a while, but a few weeks ago CM just can´t initialize.

It appeers a windows message that say's semething like (it apeers in Portuguese) " it was found a problem, sorry if interrups any program, but the programe will be shut down, bla bla bla".

Probable i'm forrgetting something. Tell me what can I do to overcome this situation?

Cheers

 

[gorrao]

ok, i've forgoten to look back in the treath.
beginer's mistake.
I've found the solution.
Hope it works.

Anyway does cm 07 works with Microsoft Framework 3.0?

 

[SAMUELKATALAN]

Absolutely yes, e.g. the CEP is full of new tournaments that work perfectly in career mode.
Common errors are:
1) forgotten to initialize some deafult team
2) dates of different stages in the wrong order (e.g. final to be played before semifinals)
3) not enough time to play all the games (e.g. on week with one day enabled for playing a home and away matches)
4) Lost links or multiple links between stages

Definitely to edit tournaments is one of the most complex editing you can do. Very powerful but very prone to errors. Use a small steps approach, start making something simple and try it immediately then add more and more features step by step.

Mate what do you mean by initialize with default team i am trying and trying and i will get to it mate hoping i can finish good. Because i started with the small patch and it function good, but when is transfers time during career mode in Brazilian league it crashes. I need more digest but i will try

 

[$MZ77$]

I've downloaded a lot of new kits but I can't import them with CM07 Beta 2.08 cuz they have the wrong size but every kitmaker does them in this size.... What should I do???

THX

PLZ HELP ME

WHERE R U EXPERTS???

 

[Pat11]

to excuse my English, I am French

I have a question
how made one to remove the drawing of random lots of
the group in the tournament please
thanks.

 

[Rinaldo]

Hi everyone!

Rinaldo i have a question. I have created a tourament in fifa and it works very very good. But i have a small problem. the tournament appeers in tourament and i career mode. in tourament mode works perfect i have a group stage and then the finals. In tournament mode i can watch the table at every point and i know on which place i am. The problem is the career mode in wich i can see only the next and previous matches but not the table.

But tournament like the UEFA or CL cup the tables appear normal(u can wath the table)

please help

This is a limitation of FIFA 07.

 

[Rinaldo]

I have downloaded a gameplay for fifa 07. They said to install manually with CM07. There are 4 .ini files and they are to be imported into config.dat and ini.big

I was wondering if anyone could explain for to do it with CM07. They say you can also use file master 07, but i have no clue how to use that, they just have weird hex editor and have no clue how to import.

CM07 is NOT dedicated to Gameplay. You have to use File Master 07:
browse for config.dat, click import and select the 4 ini files. Do the same for the ini.big in the data\cmn folder.

 

[Rinaldo]

I did it manually thru the mdb exported from UniDB, assigning the teams their international IDs in that table. Every other European team is fine, just these three as well as another team, Montenegro, whom I gave a manually created (ie thru the mdb) ID of 110083 and Nationality of 209 (as 110083 was close to Serbia's 110082 and 209 is the defunct Yugoslavia's nationality)

Umm I also kind of fixed this by giving the 4 teams new nationality IDs (226-229); everything is fine ingame and these teams have International Selections according to thier new id's, which i didnt have before; but I don't wanna save with CM now b/c they're still showing up as Australia in your program...

I understood the reason. In the table international_ids the nationalityid column is limited by the database structure in the range 1-195 ( and 195 is the Australia id). If you change it with UniDb CM does not accept it because it is out of range. You must expand the database, after this operation it will accept up to 255 and it will work fine.

 

[Rinaldo]

I've downloaded a lot of new kits but I can't import them with CM07 Beta 2.08 cuz they have the wrong size but every kitmaker does them in this size.... What should I do???

THX

PLZ HELP ME

Which size are you talking about? Which file format (fsh, bmp) ? Which method are you using to import? Do you receive any error message from CM ?

If you want a good answer you MUST do a good question !

 

[Rinaldo]

CM07 crashes right when I load a referee kit using CEPv4. I hit "load" select the kit, and it crashes with an error message.... is there any way around this??
please help!

I will download CEP 4 and let you know as soon as possible. I wonder if they have removed from the teamkit table the entries for the referee kits (the one marked with kittype = 5).

 

[Rinaldo]

Mate what do you mean by initialize with default team i am trying and trying and i will get to it mate hoping i can finish good. Because i started with the small patch and it function good, but when is transfers time during career mode in Brazilian league it crashes. I need more digest but i will try

The dafault team is the one selected in the white box on the right of the yellow box describing the team selection rule.
I guess that your problem is not in the tournament but in the "young" or "youth" players. Browse this thread for other posts about this issue.

 

[Rinaldo]

to excuse my English, I am French

I have a question
how made one to remove the drawing of random lots of
the group in the tournament please
thanks.

There are other posts about this topic, last are about the 6th of july. Anyway this problem does not have a definitive solution.

 

[RobbieD_PL]

I understood the reason. In the table international_ids the nationalityid column is limited by the database structure in the range 1-195 ( and 195 is the Australia id). If you change it with UniDb CM does not accept it because it is out of range. You must expand the database, after this operation it will accept up to 255 and it will work fine.

Are you sure about this? After i expanded the db with CM i looked at the international ids again and it just gave 3 copies of each of the id entries that i had.

 

[$MZ77$]

Which size are you talking about? Which file format (fsh, bmp) ? Which method are you using to import? Do you receive any error message from CM ?

If you want a good answer you MUST do a good question !

Sry for the bad question...I have solved the problem

 

[Pegasus]

Hello Rinaldo

I'd like to know if it's possible to create a tournament within Creation Master 07 with random teams.
Everytime I create a tournament and insert teams, I have to choose a championship and then a team from the reported championship (for example : 1rst of EPL, 2nd of Belgian Jupiler league etc).
I'd like to create a tournament where I could have the teams randomly from a designed championship. For example a World Cup where I choose the International section and then the teams are automatically and randomly chosen everytime I run the tournament (so I have a different tournament each time) and this without using the tournament mode into the game.
Thanks