Creation Master 11 [Official Thread]

[Boswell]

I am sure this topic is on the forums some where, i just can't fine it. I want to add teams to fifa 11 on pc? how do i do this with Creation Master 11?

Thanks

Boswell

 

[piciubrunet]

@FifaMan017, I think you didn't write all fields with league name (small name, long name ,etc.)

 

[Gourbish]

So nobody knows if it is possible to make trades using CM11 ?

 

[johncmcleod]

Can someone please help? This is a bit of a noob question and I know it will take just a second for someone to answer.

I downloaded and installed CEP 11 and it works fine, but they just came out with a new Argentine patch. I'd like to combine the two. It would add in a league (the second Argentine division) and I would like to replace the CEP Argentine first division with the one in this patch (the CEP makers did a fantastic job but this one is even better since they spent all of their time on it as opposed to having to do 70 other leagues). For some reason, they decided to only release it with an .exe installer, so I need to make the CMP myself and figure out how to import it into the game. How exactly can I do this?

I installed the Argentine patch on a clean FIFA and made a patch out of it using the newest Creation Master (and I ran it as an administrator). I did this by simply clicking on patch, create, taking me to the patch creator window. I selected Argentina and added it to the right hand side of the screen...I did this as to save both leagues and everything involved with them. Then I clicked create and saved it as a .cmp.

When I reinstalled FIFA and added CEP I tried to add in this patch to the game. I went to load patch, and on the screen there was a list of everything in the patch. Some things on the list were green, others were red. I clicked select all and then import. The reason I did this was because many of the red players were players in the game from the CEP patch that I wanted to be replaced by the new CMP's players. At the end at one point I got an error message saying there was no more room, but I clicked continue and nothing happened. I checked the database and everything seemed great. The players had been successfully replaced and everything seemed fine.

At a couple parts of looking through the database though I got error messages saying parts of artwork were missing. The old Argentine league was still there and had a few teams left in it, but in the Copa Libertadores and Copa Sudamericana the correct league was selected. So I deleted the old Argentine league. I saved it and loaded up FIFA. It loaded up successfully until I selected exhibition match from play now. Before it got to the part where you choose teams it crashed. One thing I know I did wrong was that I forgot to deleted my FIFA 11 folder in My Documents that had a profile in it. When I loaded that at the beginning it may have caused the crash. I will try the same thing again having deleted that profile, but I am sure that I did something else wrong, and I would really appreciate it if someone could tell me what.

What I think would be easiest would be to simply delete the original Argentine league and all of the players in it and then add in this CMP. I tried that though but it didn't work. I deleted the league but all the teams were left. So I started deleting the teams and all the players are left. I am considering manual deleting every single player in the league to get this to work (after deleting all of the players I'd import the patch but not click select all, and hopefully it would automatically load up all the players), but I have a feeling that this won't work either because I'm doing something wrong, and all of the work will have been for nothing.

 

[Gourbish]

Transfer button not activated :

OK I finally understood how works the tool : in the Team panel, look at the box called "Available players" and then select a filter in this box...

 

[johncmcleod]

Getting very frustrated.

I decided I'd not take out any of the teams or anything like that. All I'd do is simply delete each player, then add in the new ones, and then transfer them to their respective teams. So I tried a test run...I deleted all of Independiente's players. Then I loaded up my patch and only selected the Independiente players and the formation. After that I went to each Independiente player (in the free agents) and transferred them to the team. When I selected them to play in an exhibition their ratings (defense, mid, attack) were all 0's I think or close. The players of course were out of position. When I tried to start the game, it went into the practice waiting screen thing and the player's jersey looked a bit messed up, like the name was in the wrong place. I couldn't tell though because it immediately crashed to the desktop.

I loaded it up again and looked under the squads section and all of the starters were named something like '12' or '10' with another character cut off after it with 6 digit overalls (the last number being cut off a bit), sometimes negatives. The backups and reserves were the real players but about 10 were missing (probably the ones who were supposed to be in the starting lineup). I Am very confused. Any ideas? Was it when I imported the formation? Or maybe does it have to do with having removed all of the players from the roster before I imported the new ones from the patch? I don't know how such a simple task could screw it up so much.

 

[nostress20]

Getting very frustrated.

I decided I'd not take out any of the teams or anything like that. All I'd do is simply delete each player, then add in the new ones, and then transfer them to their respective teams. So I tried a test run...I deleted all of Independiente's players. Then I loaded up my patch and only selected the Independiente players and the formation. After that I went to each Independiente player (in the free agents) and transferred them to the team. When I selected them to play in an exhibition their ratings (defense, mid, attack) were all 0's I think or close. The players of course were out of position. When I tried to start the game, it went into the practice waiting screen thing and the player's jersey looked a bit messed up, like the name was in the wrong place. I couldn't tell though because it immediately crashed to the desktop.

I loaded it up again and looked under the squads section and all of the starters were named something like '12' or '10' with another character cut off after it with 6 digit overalls (the last number being cut off a bit), sometimes negatives. The backups and reserves were the real players but about 10 were missing (probably the ones who were supposed to be in the starting lineup). I Am very confused. Any ideas? Was it when I imported the formation? Or maybe does it have to do with having removed all of the players from the roster before I imported the new ones from the patch? I don't know how such a simple task could screw it up so much.

I think its because of the formation

 

[regularcat]

Getting very frustrated.

I decided I'd not take out any of the teams or anything like that. All I'd do is simply delete each player, then add in the new ones, and then transfer them to their respective teams. So I tried a test run...I deleted all of Independiente's players. Then I loaded up my patch and only selected the Independiente players and the formation. After that I went to each Independiente player (in the free agents) and transferred them to the team. When I selected them to play in an exhibition their ratings (defense, mid, attack) were all 0's I think or close. The players of course were out of position. When I tried to start the game, it went into the practice waiting screen thing and the player's jersey looked a bit messed up, like the name was in the wrong place. I couldn't tell though because it immediately crashed to the desktop.

I loaded it up again and looked under the squads section and all of the starters were named something like '12' or '10' with another character cut off after it with 6 digit overalls (the last number being cut off a bit), sometimes negatives. The backups and reserves were the real players but about 10 were missing (probably the ones who were supposed to be in the starting lineup). I Am very confused. Any ideas? Was it when I imported the formation? Or maybe does it have to do with having removed all of the players from the roster before I imported the new ones from the patch? I don't know how such a simple task could screw it up so much.

bro what we have done for cep 11 to be able to have so many teams w/ the formation limitation is way beyond a noob editor like you are capable of doing.

no matter what you do any team created for cep 11 doesnt have a individual formation but a shared 4-4-2 formation.

you are crashing because your players & thier positions dont match up in 3 locations.

 

[eurique]

esteghlal f.c
mate there was a thread devoted to this "0" problem
and there I explained how to solve it

Hi V.K,

I have this same problem.
I've tried looking for it, but to no avail. Can you direct me to that particular thread mentioned?
Thanks in advance!

 

[FifaMan017*]

I have a question. Can I put each team a adboard???

 

[ledatcr2]

I have a question. Can I put each team a adboard???

can't

 

[Douglas]

I need help with CM11 please! I can not understand why when I start the manager mode all my squads line ups are all messed. I edited them with the last version of CM11 and when I choose to play a friendly match it is okay but in the manager mode all squads line up are messed. Could you tell me if there is a solution for this?

Thanks in advanced.

 

[johncmcleod]

Here is a really quick, basic newbie question.

I don't understand how to import a player who has the same name as one in the game. If the player has a unique name, on the Patch-Loader screen, it is in green. If he has the same name as another player somewhere in the game, his name is in red. I know how to replace the player with the new one in the patch (say I want to replace Jairo Castillo in the game with Jairo Castillo from the patch), you select him and on the Replace Selection on the right-hand side of the screen of the Patch Loader you select replace (the choices are replace, create, use patch ID). So in the case of the same name simply being a coincidence and not the same player, I figured you could just select 'create' and it would create the new player. But it doesn't. I select the player, select create, and import him, and I can't find him in the game! I go to search players and filter all but he won't show up! I can successfully replace existing players and create players with their name in green (meaning their name isn't in the game), but I can't create players with their name in red (meaning their name is shared by another player but I don't want to replace him I want to create another player). Please help!

 

[johncmcleod]

I am absolutely livid right now.

I did a clean install of FIFA, loaded up CEP, etc. and it works fine. So I load up Creation Master, running as an administrator of course (candidate, the newest version), making sure to delete the FIFA folder in my documents beforehand. I simply delete all of the players on Independiente, and then load up the patch and select the Independiente players in the patch and click 'import.' Nothing else. The players all appear in the free agents section. I move them to Independiente. I save and close out of it. I go to start an exhibition match and select Independiente. What was strange is that the team showed 3 stars but the ratings (attack, midfield, defence) were all on 0. I went to team management though and everything looked perfect other than the players being out of position. I started the game and it loaded up the arena screen where you dribble with the player and go for goal. The stadium loaded up fine. When I pressed 'start' to play, it crashed to the desktop. It doesn't crash with any other team (created or original), only Independiente. I regenerated but it didn't change anything.

I have no idea wrong. I just tried to do the easiest task possible using CM and it failed on me. I don't even have any idea where I went wrong because I did so little with it. Can anyone help me?

Edit: the only thing I may have done wrong is that I may have selected one of the red names along with the green ones and selected 'replace' under replace selection when I imported it (one of the players was a duplicate). Could that have done it?

 

[enemyofgod]

Can someone advise, even after all attributes added to a player, i still could see players are still on Generic faces. Could someone tell me what should i do after adding faces? I've done regenerating bh's. Still no luck..its rather frustrating..

 

[121314]

Hello guys,i love fifa 11 so i decided to create my own team via CM11,but,there is a problem with my new team in-game.

why it look like this in-game

....when i changed the name in CM

please someone help

 

[scouser09]

Hello guys,i love fifa 11 so i decided to create my own team via CM11,but,there is a problem with my new team in-game.

why it look like this in-game

....when i changed the name in CM

please someone help

You have only added names in 2 of the 5 fields for names (see your red box).

 

[enemyofgod]

I found out that starting a new profile shows all new added faces..fantastic..

 

[V.K]

Why the hell does the game crash almost every time I start a match with created teams?

 

[Alex-lightning]

Check ID off Formaion of team. It must be not more than 899