Export FaceGen faces (.fg) to head_0.rx3 in FIFA

[verh]

1. Look this first page
http://www.soccergaming.com/forums/showthread.php?t=172816


There you can find head model made by du_oro for FIFA
Head model necessary for FIFA made by do_oro10
http://www.mediafire.com/?at5qekatgwbqoeg
which you should put in main folder FaceGen (I'm using ver. 3.1 and modeller ver. 1.1).
Watch how correctly put head model http://www.youtube.com/watch?v=m3QQQlR07yc

My FaceGen 3.1 is situtated CProgram Files (x86)\Singular Inversions\FaceGen Modeller 3.1
But my folder with faces made in FG and cff files and head model that I used should be at desktop or document or anywhere you (it shouldn't be in the main folder C/ProgramFiles/FaceGen) better to make another folder with head model made by do_oro10 and head.rx3 and working face cff like I did it, created another folder at the desktop an there I save all my faces for example here CUsers\Desktop\FIFA 12\csamFIFA11-12 Faces by du_oro10

After all these you can create faces in FaceGen with Photofit but I recommend you to read how rightly to put points at photo and read this it'll be very useful to make better face.
http://www.facegen.com/modeller31_help.htm#photofit
"READ PHOTOFIT TAB"

Then after you've created your face
IMPORTANT du_oro10 recommend to use in FacGen and when you save Orphographic view in camera tab (It's the same view that is used in FIFA)

After you've created face you save this face with button save and save it anywhere you want in .fg file for further fixes and updating of this face.

2. Finished face you should export with coordinates that is shown at CONVERTION COORDINATES image (0.096500 - scale etc) and others.

Export your face to folder ... for example as I did in folder
CUsers\Desktop\FIFA 12\csamFIFA11-12 Faces by du_oro10
anywhere you want where is your folder with head.rx3 and working face file
(better not export faces to main folder in FaceGen because you'll have a lot of faces and files and textures in maine FaceGen folder) - just create another folder in document or at the desktop anywhere you want and save there you work, for example my folder is situated at the desktop in folder FIFA 12 with mane other faces and textures.

Then after exporting your face in .obj to a folder with many other files (other files and head and eyes texture for your face) you can close FaceGen.
EXPORT FILE IN .OBJ and ORPHOGRAPHIC camera and use last CONVERTION COORDINATS 0.096500 (see conversion coordinates) etc.

3. IMPORTING AND EXPORTING CFF FILES IN 3ds MAX.

After you've installed 3ds MAX (better to use last versions), for example Autodesk 3ds Max 2011 or 2012 (as I use).
Than you should donwload FIFA 11 CYBER FACE CONVERTOR

THERE IS NOT TROJAN VIRUS - I"M USING IT AND COMP WORKS FINE< MANY PEOPLE USING IT AND THERE IS NO VIRUS.
DOWNLOAD CYBER FACE CONVERTER AND SAVE IT AT THE DESKTOP AND THEN TURN OFF!!!!!!! I REPEAT TURN OFF YOU ANTIVIRUS (THERE IS NOT TROJAN INSIDE) and install it at your comp (for example in games folder or at you desktop anywhere you want).

After this you should go there where you've installed CYBER FACE CONVERTOR and go into the folder called SCRIPTS and copy all scritps and files in this folder (FOLDER CALLED SCRIPTS - there are 5 files)
AFTER THIS YOU SHOULD PASTE THESE 5 FILES INTO FOLDER SCRIPTS IN 3ds MAX AND PASTER THEM and also copy these 5 fiels and paster them in folder SCRIPTS/STARTUP and paste them there also.
And then COPY CFF.PLUGIN from CYBER FACE CONVERTOR scripts folder and put it to folder PLUGIN IN 3ds Max.

That's all, scripts are imported in 3ds Max after this you should edit the view of your menu in 3ds Max to make appear import and export cff files buttons.

4. AFTER THIS YOU SHOULD GO INTO 3ds Max and push at the right empty top corner of 3ds Max right button of your mouse and there will appear window where you'll word "CUSTOMIZE..." push it and there'll appear menu window.
After this you should choose toolbars tab and there in "CATEGORY" choose CUSTOMIZE User Interface.
Then go to Menus tab and push + near MAXScript and then search in the left "ACTION" window import and export cff files and move this two names (import and export) under RUN SCRIPT and save you work - to move scripts under RUN SCRIPT JUST CLICK LEFT button of your mouse and hold it until you put import and export cff under RUN SCRIPTS and that's all.
After this yous should exit 3ds Max and then reenter in it again and ous MAXScript button at the top menu in 3ds Max and you can see two functions (import and export cff file).

 

[verh]

CONTINUING...

FIXING HEAD SIZE WITH FIFA YOU CAN SEE HOW TO DO IT FROM THIS VIDEO
http://www.youtube.com/watch?v=gcrAEq1Av7A

Step 1. Enter 3ds Max and choose import cff (copy WORKING face cff and rename it for example I made mellberg I copied Working face cff and called it Mallberg.cff)
After you've entered 3ds Max you should import cff file (mellberg cff for example look this)

(Maxscripts-import cff at the top menu in 3ds Max)
After this you should watch video tutorial, push right down button and make normal view playing with face camera (push right down button called Zoom Extents All Selected ant push "TOP" at the center of the cube near you head model) you should see your model good in front view.

Then choose import from main big menu at the left top cornet of 3ds Max and choose IMPORT - IMPORT - choose our for example Mellberg.obj (that we save in folder when exported face from FaceGen), now we choose to import this .obj file and push open there will appear a window and you should take away a tip near FLIP ZE-axis (there shouln't be such tip near this word.

THEN better watch this video because it's hard to explain

http://www.youtube.com/watch?v=gcrAEq1Av7A

Choose forehead point called FaceUV1 and push it then at the left top corner choose below FACEUV1 Morpher and then pick objective and then find at the model area called headbydu_oro10 and push it then find headbydu_oro10 and oush "UP button" and make maximum number 100 !!! and then again push at head model ahd find point called headbydu_oro10 and choose from upper menu EDIT - DELETE.
DO THE SAME WITH THE EYES, choose eye point (push at the eye - they should be selected white and round after you rightly selected) you'll see at the rgiht top corner FACEUV1 and then choose morpher and then pick objective and then push at tthe eye's point calles eyesmodelBydedu_oro10 or something called like that and then again maximum number 100 !!! and then again push at eye point and choose eyemodelbydu_oro10 and delete it - upper menu "EDIT - DELETE".

That's all after this EXPORT CFF FILE TO PREVOUSLY MADE CFF FILE (MEllberg.cff)
WE SAVE (EXPORT) OUR CFF to that file that we have opened (imported cff) when we began our work.
We import in 3ds Max Mellberg.cff file and then export finished and edited work again to this Mellberg files, we replace it.

 

[adi7yan]

okay thx verh for your tutorial..

 

[verh]

NOW WE HAVE MADE CFF MODEL we need to convert it in rx3.

REPEAT WE NEED TO TURN OFF ANTIVIRUS OR PUT CYBER FACE CONVERTER IN EXCEPTIONS IN ANTIVIRUS SETTINGS.

P.S. For normal work for CYBER FACE CONVERTOR you should install slimDX (I've tried all slimDX but helpful for me was June 2010 or March 2011 you should install slimDX to Cyber Converter works properly)

AFTER THIS YOU SHOULD DOWNLOAD if you don't have it at your PC
http://download.tuxfamily.org/notepadplus/5.9.3/npp.5.9.3.Installer.exe
It's a Notepad ++ (you'' need it for fixing cff files)

LOOK THIS IT"S VERYYYYYYY IMPORTANT (CHANGE POINTS TO COMA) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Without doing it all your work won't convert in Cyber Face Converter.
http://ukrliga.com/masterskaya-32/konvertatsiya-v-rx3-novyi-sposob-395/
You choose you cff (Mellberg.cff for example saved file with our made and fixed face) and push right button of our mouse at it and then choose EDIT WITH NOTEPAD ++ and choose tab "SEARCH" and choose "REPLACE"
AND REPLACE . to , WE CHANGE POINT INTO COMMA and push ""REPLACE ALL" !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
And choose "SAVE" and close this file.

LOOK THIS IT"S VERYYYYYYY IMPORTANT (CHANGE POINTS TO COMA) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Without doing it all your work won't convert in Cyber Face Converter.
http://ukrliga.com/masterskaya-32/konvertatsiya-v-rx3-novyi-sposob-395/
You choose you cff (Mellberg.cff for example saved file with our made and fixed face) and push right button of our mouse at it and then choose EDIT WITH NOTEPAD ++ and choose tab "SEARCH" and choose "REPLACE"
AND REPLACE . to , WE CHANGE POINT INTO COMMA and push ""REPLACE ALL" !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
And choose "SAVE" and close this file.

LOOK THIS IT"S VERYYYYYYY IMPORTANT (CHANGE POINTS TO COMA) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Without doing it all your work won't convert in Cyber Face Converter.
http://ukrliga.com/masterskaya-32/konvertatsiya-v-rx3-novyi-sposob-395/
You choose you cff (Mellberg.cff for example saved file with our made and fixed face) and push right button of our mouse at it and then choose EDIT WITH NOTEPAD ++ and choose tab "SEARCH" and choose "REPLACE"
AND REPLACE . to , WE CHANGE POINT INTO COMMA and push ""REPLACE ALL" !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
And choose "SAVE" and close this file.

LOOK THIS IT"S VERYYYYYYY IMPORTANT (CHANGE POINTS TO COMA) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Without doing it all your work won't convert in Cyber Face Converter.
http://ukrliga.com/masterskaya-32/konvertatsiya-v-rx3-novyi-sposob-395/
LOOK THIS IT"S VERYYYYYYY IMPORTANT (CHANGE POINTS TO COMA) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Without doing it all your work won't convert in Cyber Face Converter.
http://ukrliga.com/masterskaya-32/konvertatsiya-v-rx3-novyi-sposob-395/

You choose you cff (Mellberg.cff for example saved file with our made and fixed face) and push right button of our mouse at it and then choose EDIT WITH NOTEPAD ++ and choose tab "SEARCH" and choose "REPLACE"
AND REPLACE . to , WE CHANGE POINT INTO COMMA and push ""REPLACE ALL" !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
And choose "SAVE" and close this file.

Then we open CYBER FACE CONVERTER AND CHOOSE "CFF to RX3" option and and choose first head.xxxx.rx3 and then our made and edited cff head file (for example Mellberg.cff)

You choose you cff (Mellberg.cff for example saved file with our made and fixed face) and push right button of our mouse at it and then choose EDIT WITH NOTEPAD ++ and choose tab "SEARCH" and choose "REPLACE"
AND REPLACE . to , WE CHANGE POINT INTO COMMA and push ""REPLACE ALL" !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
And choose "SAVE" and close this file.

And that' all - CFF IMPORTED and we have our made face in rx3 file that can be used in FIFA 11 and even in FIFA 12 but unfortunately with bugs until we have a good converter from Rinaldo or someone else for FIFA11-FIFA 12 faces.

P.S. We need only head.xxxx.rx3 file, Mellberg.obj file for 3ds Max and Mellberg.fg file for further fixes and updates in FaceGen and that' all other unnecessary files can be deleted.

HOPE THAT THIS DETAILED INSTRUCTION WILL BE USEFUL AND HELPFUL FOR SOMEONE!!! I've tried to explain it very detailed and with pictures.

And a little addition for those who want's to download Autodesk 3ds Max 2012 here is a link
http://www.torrentino.com/torrents/570483

P.P.S. And better to turn off Internet and other programs when you are using 3ds Max because he is giving error sometimes when there are stared a lot of processes (using many programs).

CYBER FACE CONVERTER LINKS
http://www.mediafire.com/?91w4q7c2bxzo4cl
http://www.gamefront.com/files/21385556/cyber_faces_converter_v1.0.rar
http://www.zshare.net/download/9919912701fe5fbb/

Add CFC in exceptions in your antivirus or just turn off antivirus while you're working with CYBER FACE CONVERTER !!!

P.P.P.S And who got problem with Cyber Face Converter something like this slimDX 2.0.10.4... or somehing like this you just need to install slimDX from this site http://slimdx.org/releases.php
If you have 2.... you need to install slimDX NET 2.0 (for example June 2010 or March 2011 slimDX NET 2.0 helped me to solve this problem) but maybe for you'll be helpful other versions I don't know exactly.
If you have problem 4.... you need to install slimDX NET 4.0
That's all.

 

[adi7yan]

i see bf3 n la noire on your desktop,, what is ur notebook??

 

[adi7yan]

i see bf3 n la noire on your desktop,, what is ur notebook??

 

[verh]

i see bf3 n la noire on your desktop,, what is ur notebook??

Pavillion dv7 4 GB RAM 1 GB HD Radeon 5650 1,6Ghz (8 Cpu's) 500 Gb Free.
Not bad, but I'd like more RAM.
Bf3 ... L.A.Noire better for me but now playing in Alan Wake for PC.

 

[bagshatLFC]

verh
&#1074; &#1051;&#1057; &#1087;&#1086;&#1089;&#1084;&#1086;&#1090;&#1088;&#1080;

 

[sahib]

okhie guyz....im not a facemaker...but out of curiosity just askin:
So will we be able to add faces in fifa 12?????
will this work???

 

[dissectionalone]

okhie guyz....im not a facemaker...but out of curiosity just askin:
So will we be able to add faces in fifa 12?????
will this work???

Until Jor1980 (the creator of cyber faces converter) releases what he had acomplished as some sort of beta converter or Rinaldo manages to fix the convertion in CM12 the faces get out of position if used in Fifa 12, like the regular converted Fifa 11 faces.

 

[fabi1102]

Can anywhere upload CyberFaces Converter? The one from Moddingway and other Hosters are broken or so.
Can anywhere it upload new?

 

[-=DiKoBrAz=-]

&#1043;&#1054;&#1042;&#1054;&#1056;&#1048;&#1064;&#1068; &#1055;&#1054; &#1056;&#1059;&#1057;&#1057;&#1050;&#1048;?
&#1055;&#1054;&#1047;&#1042;&#1054;&#1053;&#1048; &#1042; &#1057;&#1050;&#1040;&#1049;&#1055; dikobraz6498

 

[CarlosMagno]

I can't believe i work hard all day, when now the Cyber faces converter give me error

What i do?
i try several times install SlimDX
I have a Microsoft security Esentials and Kasperky both desactivated ( Kasperky closed but the other only disabled, i cant closed..) Is this the problem?

plis, Can someone covert?

http://dl.dropbox.com/u/56348220/De%20gea.rar

 

[saeedavril]

hi
thnx man for tutorial

but i problam

when end work format ccf import in cm 12 >>error >>> not support model 3d in fifia 11 !!!!

plz help me


thnx

 

[verh]

hi
thnx man for tutorial

but i problam

when end work format ccf import in cm 12 >>error >>> not support model 3d in fifia 11 !!!!

plz help me


thnx

Of course these models don't support FIFA 12 because there is no convertor from FIFA 11 to FIFA 12 and Rinaldo didn't finish his CM 12 well to import models from 11 well so some people make textures and put them on FIFA 12 models and some still make faces for FIFA 11 but there is no way to make models for FIFA 12.

 

[saeedavril]

Of course these models don't support FIFA 12 because there is no convertor from FIFA 11 to FIFA 12 and Rinaldo didn't finish his CM 12 well to import models from 11 well so some people make textures and put them on FIFA 12 models and some still make faces for FIFA 11 but there is no way to make models for FIFA 12.

hi man

but in this page and in picture tutorial has said that similary in fifa11 and similary in fifa12 is useful

so some of sites how making face a lot...i dont think all of this is just texture !!!! ...please help me


thnx man

 

[du_oro10]

hi
thnx man for tutorial

but i problam

when end work format ccf import in cm 12 >>error >>> not support model 3d in fifia 11 !!!!

plz help me


thnx

Please post a screenshot of your problem

 

[saeedavril]

import not support !!! only 1 face load !!!!!

Please post a screenshot of your problem

I did this picture toturial Properly...and I made face in facegen and I did like picture toturials but I did one parts even several time...even before that change cff with notpad software++i change point to comma and then i convert it to rx3 but...
When I want to import rx3 to CM12 head_xxx_0_0_0.rx3 give error that this file supported FIFA11 nad screen be black...but when I change name of head_xxx_0_0_0.rx3 to every name,in time of import,it doesnt show file but when i type their name i can open it.but every time just show one 3d face not my 3d that i make it on facegen

plz help me du_oro10
thnx man

 

[du_oro10]

I did this picture toturial Properly...and I made face in facegen and I did like picture toturials but I did one parts even several time...even before that change cff with notpad software++i change point to comma and then i convert it to rx3 but...
When I want to import rx3 to CM12 head_xxx_0_0_0.rx3 give error that this file supported FIFA11 nad screen be black...but when I change name of head_xxx_0_0_0.rx3 to every name,in time of import,it doesnt show file but when i type their name i can open it.but every time just show one 3d face not my 3d that i make it on facegen

plz help me du_oro10
thnx man

Ohhh I see, well , FIFA11 Heads.rx3 (my model uses this) is not 100% commpatible with FIFA12 Heads.rx3, so that model you see after import, is like a template that CM12 uses to try to convert FIFA11 heads.rx3 into FIFA12 heads.rx3, so we all need to waith the new CM12 version

 

[saeedavril]

Ohhh I see, well , FIFA11 Heads.rx3 (my model uses this) is not 100% commpatible with FIFA12 Heads.rx3, so that model you see after import, is like a template that CM12 uses to try to convert FIFA11 heads.rx3 into FIFA12 heads.rx3, so we all need to waith the new CM12 version

hi man
thnx...

please explain your post more... thnx