This should help, it helped me alot! it's the great Jabber from Evo-Web's tutorial
---------------------------------------------------------------------------------
http://forums.evo-web.co.uk/showthr...hlight=Waterloo
Waterloo Tutorial by Jabber
1. Set up a Directory/Folder.
2. Extract your param_dat.bin from your AFS file to the directory you setup in step 1 and the SLES_527.60 file if you've got a PS2.
3. Open AFSExplorer (I use V3.4 you can get it from Here!).
4. Click "View" | "ZLIB Manager" to open the ZLIB Manager or just press F6 from the main AFSExplorer screen.
5. Click "Load Sections from file" and locate the directory with your param_dat.bin in, select it and click open. Now in the main ZLIB Manager Window you should have 2 files, a header and a compressed data file.
6. Highlight the "ZLIB" to the left of "Compressed data" and the "<< Compress" and ">> Unpack" buttons should become available.
7. Click ">> Unpack" and locate the directory you made and save in there as param_dat.bin_000.
8. Now open the Waterloo Tool (I use 3.1.0 you can get that Here!).
9. At the bottom where it says "Version" (NOTE! make sure your Desktop Resolution is set to 1024x768 or higher) make sure you select your correct version from the dropdown menu ie PES4, WE8 etc.
9. At the bottom where it says "File Name", click the small unmarked square button to the right of the long white section.
10. Locate your param_dat.bin_000 file you made from the previous steps and click open.
11. Click the big "Retrieve File Button located to the bottom right of the Waterloo Tool (NOTE! If your editin a Xbox PES4 file and you get an error about the SLES file, just click ok and the file will be loaded as normal).
From here you can do what you want to, once your happy with the changes you've made click the "Write File" button and your changes will be saved in your param_dat.bin_000 file
To get the File back into your AFS ready to use follow steps 3 - 7 of this tutorial and instead of clicking the ">> Unpack" button Click the "<< Compress button", locate your updated param_dat.bin_000 and click open.
Now personally I "Save sections" to a different part on my pc and save a new param_dat.bin file, but I aint sure if this is neccersary as I'm guessing once the 000 file is compressed back the param_dat.bin gets automatically updated. Maybe someone can confirm or this?, but this is the way I learned myself and it works
From there it's just a matter of importing the files back into the AFS etc.
Enjoy!
Hope this tutorial is of some use to someone, I may add some pics @ a later date to make things more graphical, but this will do for the time beeing. If you notice any mistakes etc PM me and I will correct them.
All thanks goes to Waterloo for this superb tool, keep up the good work m8
Jabber
---------------------------------------------------------------------------------