Creation Master 07 Released

[dule982k]

Rinaldo check if CM last version 2.09 have a error when importing stadiums in CMP format
strange thing happens only in OVERCAST mode
"the frame support and the two poles suspending the mesh are in front of the goalie. I tried exporting the o.file from clearday and night mode but the same backward nets appeared"

Older versions did not have this problem.

THANKS in advance

 

[fuser1981]

Yo Rinaldo i cannot download CM07 from the link that carries you to filefront.com, that site is giving a lot of problems, it keep reloding the advertisement page, can u upload to a personal or a next site that does not
use ileront.com to get the iles

I think I can help you with that,,I will upload the file to a rapidshare..good luck.

 

[The True]

After trying to solve it myself, many times, I need your help.

used the CM to make changes in FIFA07, transfers etc
(no add tournament or those kind of stuff)
ran an whole season on sim in every game, just to make sure everything goes smooth - and it does.

so far so good.

so I've started a manager mode, all running smooth, including january transfers
however, when I finish the season, and game runs it's scheduale etc.
(I think that) it crashes when it gets to populating transfer list...

deleted the "my squads" file, started a new seasom... tried it all
but once again, it crashes at the end of the season
or might say while building info for the next season.

any clue???

thanx in advanced.

after checking it out even more, I've came to conclusion:
the whole season simulate - did not crash because I didn't bought\sell any players
while selling\buying players is saved on the mysquads file
and it colides with the edited fifa.db by CM07...

could it be that after editing rosters with CM07
I cannot make tranfers on January window etc. in manger mode??

 

[Rinaldo]

Hi Rinaldo,
I have the same problem. I tried to change the Options in the CM07 (v2.08b).
I selected the "Specific Zdata" optionbutton and seleted a number XX (which zdata file doesn't exist - I want to create a new zdata file for new the imports, to keep small sized zdata files).
I import a new stadium, and the CM07 create a new zdata_XX file. But when I chose the "3D Model" tab, it always appears "Error: 5028 - Cannot find the requested file in the zdata archive".
What's the problem? Am I doing something wrong?

I really appreciate if you could help.

CM07 says that the 3D model has not been imported in the zdata. Double check using FileMaster and verify if this is the case. Try saving in an existing zdata and tell me if it works.

 

[Rinaldo]

Rinaldo check if CM last version 2.09 have a error when importing stadiums in CMP format
strange thing happens only in OVERCAST mode
"the frame support and the two poles suspending the mesh are in front of the goalie. I tried exporting the o.file from clearday and night mode but the same backward nets appeared"

Older versions did not have this problem.

THANKS in advance

Sorry but I did'nt understand the description of the problem. Btw. CM07 does not manipulate .o files in any way, they are simply saved as they are.

 

[Rinaldo]

After trying to solve it myself, many times, I need your help.

used the CM to make changes in FIFA07, transfers etc
(no add tournament or those kind of stuff)
ran an whole season on sim in every game, just to make sure everything goes smooth - and it does.

so far so good.

so I've started a manager mode, all running smooth, including january transfers
however, when I finish the season, and game runs it's scheduale etc.
(I think that) it crashes when it gets to populating transfer list...

deleted the "my squads" file, started a new seasom... tried it all
but once again, it crashes at the end of the season
or might say while building info for the next season.

any clue???

thanx in advanced.

after checking it out even more, I've came to conclusion:
the whole season simulate - did not crash because I didn't bought\sell any players
while selling\buying players is saved on the mysquads file
and it colides with the edited fifa.db by CM07...

could it be that after editing rosters with CM07
I cannot make tranfers on January window etc. in manger mode??

This could be a known issue related with young players. Browse the thread to find the solution. (donovanfan was the first to recognize the problem so you can search his posts)

 

[Lupi]

first i wanna thank u for this wonderfull program.
now can i ask u (becouse i searched but i didnt found nothing about it) if u can post a image showing the Shorts hot spot position please???

 

[leavemealone]

i have a problem-starting new season causes fifa07 to crash.
i have updated rosters upto 8/8 by downloading file from some site and havent done any transfers using CM07.
i played with liverpool for 1st season without any problem(no crash for new season).In middle of 2nd season i imported faces of manager using CM07.so,now the game crashes for new season.i can play with other team with new season but not with the same team.
Also i had kept backup of my fifa.db but the faces of the managers(imported) are there in all backups.it means that some other file contains the faces of managers which i should replace to get my fifa working properly.CAN SOMEONE TELL ME WHICH FILE SHOULD I REPLACE?
i checked the thread by donovanfan for solution but i think there is no problem with my players ID because my first season was ok but problem is caused by importing managers faces.

 

[Rinaldo]

first i wanna thank u for this wonderfull program.
now can i ask u (becouse i searched but i didnt found nothing about it) if u can post a image showing the Shorts hot spot position please???

I don't know.

 

[Rinaldo]

i have a problem-starting new season causes fifa07 to crash.
i have updated rosters upto 8/8 by downloading file from some site and havent done any transfers using CM07.
i played with liverpool for 1st season without any problem(no crash for new season).In middle of 2nd season i imported faces of manager using CM07.so,now the game crashes for new season.i can play with other team with new season but not with the same team.
Also i had kept backup of my fifa.db but the faces of the managers(imported) are there in all backups.it means that some other file contains the faces of managers which i should replace to get my fifa working properly.CAN SOMEONE TELL ME WHICH FILE SHOULD I REPLACE?
i checked the thread by donovanfan for solution but i think there is no problem with my players ID because my first season was ok but problem is caused by importing managers faces.

Manager faces are saved in data/gui/assets/staff/ in files m#.big
Fifa.db is not changed by this operation.
Honestly, I really wonder that this could be the true cause of the crash but you can try to remove the files.

 

[leavemealone]

you are correct.the real cause is the roster update.i deleted all files of manager faces but still the game crashes.i also tried reinstalling fifa07 and then trying with roster update and quick sim all matches for a season but the game crashes again.error that game shows is "Just-In-Time debugging" error.
so,i am now trying to figure out that why didnt my game crash in its first season earlier and now it is crashing even after reinstalling fifa07.
i see only one difference-in 1st season(when game didnt crash) i had played all matches with no quick sim used.but it(quick sim) shouldnt be the reason for crashing.
what is the solution for this problem caused by roster update?

 

[arcadeshadow]

CM07 says that the 3D model has not been imported in the zdata. Double check using FileMaster and verify if this is the case. Try saving in an existing zdata and tell me if it works.

Hi Rinaldo,
I haven't find a solution yet to this problem. I have imported the files into the
zdata_60 file. But I want to import more file into a new zdata (in this case,
I chose the "Specific Zdata" option and select the number 61.
I import a new stadium, the CM07 creates the new zdata file with all the stadium files (*.o and *.fsh), but when I chose the "3D Model" tab, the error shows up.
But if I import to the zdata_60 file, it works fine.

Can you help me Rinaldo?

 

[Rinaldo]

Hi Rinaldo,
I haven't find a solution yet to this problem. I have imported the files into the
zdata_60 file. But I want to import more file into a new zdata (in this case,
I chose the "Specific Zdata" option and select the number 61.
I import a new stadium, the CM07 creates the new zdata file with all the stadium files (*.o and *.fsh), but when I chose the "3D Model" tab, the error shows up.
But if I import to the zdata_60 file, it works fine.

Can you help me Rinaldo?

First let me correct myself: the message 5028 appears when the texture file is not found and not when the 3D model is not found. So, if this message appears, it is the .fsh that is missed. This contrasts when you say that all the .o and .fsh are present. One of the two statements is necessarly wrong. Honestly I think you are doing something else, like for example try to enable an environment that is not present for that stadium (e.g. sunset) could it be ?

 

[leavemealone]

problem solved-reinstalled fifa and only used the roster update.earlier i had few more patches installed too like Fifa Dome patch etc.

 

[Rinaldo]

what is the solution for this problem caused by roster update?

Which roster update is it ?
If it is the official patch from EA... forget it. No way to edit the game with that patch working.
If it is another patch you should ask to the authors of the patch.

 

[leavemealone]

link of update which i am using
http://www.eamods.com/Downloads/details/id=276.html
i got this link from the thread "Updated rosters?"

 

[arcadeshadow]

First let me correct myself: the message 5028 appears when the texture file is not found and not when the 3D model is not found. So, if this message appears, it is the .fsh that is missed. This contrasts when you say that all the .o and .fsh are present. One of the two statements is necessarly wrong. Honestly I think you are doing something else, like for example try to enable an environment that is not present for that stadium (e.g. sunset) could it be ?

Hi Rinaldo,
Well I could be weird but it's true. All the needed files are in the zdata archive.
As you know, the CM07 puts by default the number 60 to the specific zdata option. And if I import the stadium X with this zdata number, it works fine. But if I change the specific number to 61 and try to import the same stadium X, the error appears (and the files are in the new zdata_61 archive). And
I'm not enabling an environment that is not present in the stadium.
Maybe I'm doing something wrong but I don't know why...

By the way, what is the meaning of "Automatic" in the CM07 options, before the "specific zdata" option.

PS: Thanks for trying to help me.

 

[jenskaidar]

Hello where do i get this version of the Net Framework: v2.0.50727
Im afraid to download it because it might **** up my computer.Or is it safe to download it???

 

[Rinaldo]

link of update which i am using
http://www.eamods.com/Downloads/details/id=276.html
i got this link from the thread "Updated rosters?"

As already said: ask to the author of the patch. I cannot solve your problem.

 

[Rinaldo]

Hi Rinaldo,
Well I could be weird but it's true. All the needed files are in the zdata archive.
As you know, the CM07 puts by default the number 60 to the specific zdata option. And if I import the stadium X with this zdata number, it works fine. But if I change the specific number to 61 and try to import the same stadium X, the error appears (and the files are in the new zdata_61 archive). And
I'm not enabling an environment that is not present in the stadium.
Maybe I'm doing something wrong but I don't know why...

By the way, what is the meaning of "Automatic" in the CM07 options, before the "specific zdata" option.

PS: Thanks for trying to help me.

I believe you are in good faith, as I am too, but what you are saying is not logically possible. I tried to import stadiums in zdata 61 I didn't find any problem so, definetely, I was not able to reproduce your problem. With this information I have not any clue to help you.

Btw. the automatic option for zdata allows to CM07 to automatically search for a zdata with lesss then 500 files and put the new files there, but you don't know where they are going.